Leading 10 common forklift accidents ， forklift procedure need to pay attention to these issues ！.
Leading 10 common forklift accidents ， forklift procedure need to pay attention to these issues ！.
Blog Article
Don't take too lightly the forklift at work. If the operation is not good, there will certainly be severe crashes in mins, and there are several accidents involving forklifts.
Case 1: The forklift cargo blocked the driver's sight, and the person ahead can not be located, causing a moving crash.
Situation 2: In order to preserve the balance of the forklift when lifting heavy goods, the employees utilized their body weight as the counterweight, which nearly caused casualties.
Instance 3: The size of the forklift cargo exceeds the allowable size of the course and holds on the roadside shelf, which practically causes an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift vehicle driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift operation should take notice of these issues ：.
Start.
1. Prior to starting, observe the environments, and after verifying that there are no obstacles that impede the safety and security of driving, beep the horn initially and then begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale need to be safe prior to beginning.
3. When the forklift starts with a lots, the driver needs to first validate that the tons is stable and trusted.
4. The beginning must be slow-moving and constant.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork expensive when driving. When entering and leaving the task website or while driving, take care that there will be no challenges overhead. When the load is taking a trip, the fork has to not be raised too expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork should be reduced to the typical driving placement before driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal should be issued first. High-speed doglegs are banned. High-speed sharp turns will cause the automobile to shed side security and tip over. .
5. When the forklift is downhill, it is strictly forbidden to shut off the flame and slide, and it is prohibited to brake instantly while driving with loads unless there are special situations.
6. When the forklift is running, it needs to comply with the website traffic rules in the manufacturing facility and have to keep a certain safety distance from the vehicle in front. .
7. When the forklift is running, the load should be in the lowest setting that does not impede the driving, and the gantry must be effectively slanted back. The tons will not be increased except when stacking or loading. .
8. The height of the lots have to not obstruct the vehicle driver's view. In unique scenarios, when the product affects the forward vision, drive at a low speed when turning around.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility area is 5 km/h, and it should drive safely at a reduced rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to depend on the fork to hold things and play a balancing role. .
12. If troubles are discovered, they will Stand-on Electric Pallet Stacker be fixed and reported in a prompt manner, and they will never operate with ailments or hide them.
filling and unloading.
1. When fork-loading things, the distance between the two forks need to be adjusted as needed to make the tons of the two forks balanced and not manipulated, and one side of the thing ought to protest the rack. .
2. It is prohibited to work with a single fork or use a fork top or draw. In unique situations, security warning signs should be established to remind surrounding pedestrians. .
3. In the process of loading and dumping products, the forklift should be braked with the brake. .
4. The speed of the lorry ought to be slow and steady. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt individuals. .
5. When using a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it must be kept in mind that the fork pointer should not touch various other items or things. The tons needs to be stabilized with very little back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted ahead a little when the lots is lowered to allow for very easy positioning of the lots and removal of the forks. .
6. It is forbidden to fork goods at high speed and hit difficult things with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to loaf the fork, so as to prevent the collapse of the goods and harm people. .
8. Overwhelming is prohibited, and it is forbidden to utilize forks to lift workers to take part in high-altitude operations to prevent high-altitude falling crashes. .
9. It is not enabled to make use of the brake inertia to slide, place, round or roll items. .
10. It is not permitted to use forks to select, transform pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you need to discharge the goods or lower the fork structure.
2. Draw the hand brake deal with to dead or dispirit the emergency brake button.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the vehicle driver does not leave the automobile's line of vision and does not surpass 1 min).
4. Remove the key. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance should be inspected, and fuel, lubing oil and air conditioning water need to be included.
2. Inspect the safety performance of beginning, running and braking.
3. Check whether the lights and horn signals are complete and effective.
4. During the procedure of the forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage should additionally be examined and the seals should be changed in time.
Forklift Safety Operation Specifications.
1. You should examine prior to leaving the automobile;.
2. When you run into a person in front of you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the low point of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The transforming ought to not be also sharp to avoid the tendency of "free turning";.
6. Running up and down the slope needs to be sluggish and consistent, and no activating the incline is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across large or hefty goods and go to the driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia force to grab the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not enabled Stand-on Electric Pallet Stacker to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Auto parking is not allowed under the following conditions.
1. Curves, narrow roads, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the exact same size as the obstacle ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844